7
Assembly
6
Use the included zip ties to bundle and organize
equipment cables
F
Leave enough cable slack to
allow for full range of vertical
motion (15” / 38 cm). Failure to
heed this warning may result in
property damage and/or personal
injury.
PINCH POINT
DO NOT place hands on or near support bars. Pinch points are
created during lifting and lowering the worksurface. Failure to
follow these instructions may result in serious personal injury.
Turn side knob clockwise
or counter-clockwise if
the latch cannot lock
into the notch properly.
To avoid the potential to pinch
cables, it is important to follow
the cable routing instructions
in this manual. Failure to follow
these instructions may result
in equipment damage and/or
personal injury.
WARNING
17-06-251-933704-EN.indd 7
6/19/2017 3:24:44 PM
