Tripp Lite USA-19HS Скачать руководство пользователя страница 28

Notices FCC, CE, etc

United States FCC

InnoSys Incorporated (dba Keyspan)

4118 Lakeside Dr

Richmond, CA 94806 USA

(510) 222-0131

 

KEYSPAN High Speed USB Serial Adapter (part of USA-19HS package)

 

Model:   

USA-19H (aka USA-19HS)

Complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this de-

vice may not cause harmful interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation. 

CAUTION: Changes or modifications to the USB Serial Adapter not expressly approved by InnoSys In-

corporated could void the user's authority to operate this equipment. 

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital de-

vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. This equipment generates, uses and can 

radiate radio frequency energy, and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, there is no guarantee that inter-

ference will not occur in a particular installation. If this equipment does cause harmful interference 

to radio or television reception, which can be determined by turning the equipment off and on, the 

user is encouraged to try to correct the interference by one or more of the following measures: 

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected.

• Consult InnoSys Incorporated or an experienced radio/TV technician for help.

Complies with 15.247 

Operation is subject to the following two conditions: (1) this device may not cause harmful interfer-

ence, and (2) this device must accept any interference received, including interference that may 

cause undesired operation.

CAUTION: Changes or modifications to the KYRF-TVUSB-A and/or TVREM-200C (both part of USA-19HS 

package) not expressly approved by InnoSys Incorporated could void the EMC compliance and negate 

the user's authority to operate this equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital de-

vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. This equipment generates, uses and can 

radiate radio frequency energy, and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. However, there is no guarantee that inter-

ference will not occur in a particular installation. If this equipment does cause harmful interference 

to radio or television reception, which can be determined by turning the equipment off and on, the 

user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is con-

nected.

Consult InnoSys Incorporated (aka Keyspan) or an experienced radio/TV technician for help. 

USA-19HS - User Manua

l

                      

Page

 28

 of 

30

Содержание USA-19HS































Отзывы: