USB 2.0 SHARE SWITCH with FILE TRANSFER
Model: U230-204-R
2
1
3
4
FILE
TRANSFER
A
B
C
B
D
Features
Top Panel
A
Push-Buttons
Back Panel
B
Computer Connection Ports
C
USB Device Ports
D
External Power Supply Jack
Installation
Note: The driver must be installed before connecting your computers to the device.
1. Insert the CD into the first computer’s disc drive. Driver installation should begin
automatically. If the installation does not begin automatically, navigate to and double-click on
the
Setup.exe
file located on the CD.
2. Follow the prompts that are displayed throughout the installation process, ending with the
prompt to finish the installation. After the installation is finished, you may be prompted to
restart your computer. If this prompt comes up, click
Yes
.
3. Repeat these steps on the second computer to be connected to the device.
4. Connect the included power supply to the device and plug it into an appropriate power source.
To help protect your system from sudden, transient increases and decreases in electrical
power, it is recommended that you plug your devices into a Tripp Lite Surge Suppressor, Line
Conditioner or Uninterruptible Power Supply (UPS).
5. Connect each computer to the device using the included USB cables. The Share Switch icon
should now appear in the lower-right corner of your computer screen.
6. Right-click this icon and select
Open
.
7. You can now connect up to 4 USB devices to the USB ports on the back of the device.
200908017.indb 2
8/28/2009 2:29:40 PM
