5
Installation
Connect the local unit to a computer using the built-in USB cable.
• U224-1R4-R – No LEDs illuminate at this point.
• U224-4R4-R – The Red LED on the local unit illuminates to
indicate it is receiving power from the computer’s USB port.
(U224-1R4-R only)
Connect the external power supply to the local
unit, and then plug it into a Tripp Lite Surge Suppressor, Power
Distribution Unit (PDU) or Uninterruptible Power Supply (UPS).
Using Cat5e/6 cable, connect the RJ45 ports on the local and
remote units.
• U224-1R4-R – The Red LED on the remote unit illuminates to
indicate it is connected to the local unit.
• U224-4R4-R – No additional LEDs illuminate at this point.
(U224-4R4-R only)
Connect the external power supply to the remote
unit, and then plug it into a Tripp Lite Surge Suppressor, Power
Distribution Unit (PDU), or Uninterruptible Power Supply (UPS).
• U224-4R4-R – The Red LED on the remote unit illuminates to
indicate it is receiving power from the external power supply.
Connect a USB device to an available port on the local and/or remote
units.
Note:
Remote ports support USB 2.0 devices at USB 1.1 speeds.
• U224-1R4-R – On the local unit, the Green LEDs next to the USB
ports illuminate to indicate a USB device is connected, and
the Red LED in between the power and RJ45 jacks illuminates to
indicate a USB device is connected to the remote unit.
• U224-4R4-R – On the remote unit, the Green LEDs next to the
USB ports illuminate to indicate a USB device is connected.
Repeat step 5 for each additional USB device you wish to connect.
1
2
3
4
5
6
201111079 93-2836.indb 5
12/2/2011 4:55:55 PM
