3
Specifications
Wall Mounting
All Power Strip models feature clips for horizontal or vertical mounting on a variety of surfaces.
The user must supply other mounting hardware (screws, etc.) and determine its suitability for use
with the chosen mounting surface.
1
Mark a straight horizontal or vertical line where
you want to mount the Power Strip. At each end
of the line, mark where the edges of the Power
Strip will be located. Place a mounting clip on
the mounting surface 1” in from these edges
and mark where the screws must be driven into
the wall. For strips longer than 48” (120 cm),
also mark a screw hole for a third mounting clip
midway between the other two.
2
Keyhole Mounting:
Drive #8 screws directly
into the mounting surface. Snap the mounting
clips onto the Power Strip
2a
, then hang the
Power Strip on the screws by the keyhole slots
on its mounting clips
2b
.
3
Clip Mounting:
Drive #10 screws through
washers, through the centers of the mounting
clips and into the mounting surface
3a
. Place
the Power Strip inside one edge of the mounting
clips, then snap the Power Strip into place
3b
.
1
2a
3a
2b
3b
Model
Amperage
Rating
Outlet
Qty. x Type
AC Suppression
Rating
Input
Plug
Cord
Length
Overall
Length
Breaker
SS240806
15A
8 x 5-15R
1050 joules
5-15P
6 ft.
24 in.
15A
SS3612
15A
12 x 5-15R
1050 joules
5-15P
15 ft.
36 in.
15A
SS361220
20A
2 x 5-20R,
10 x 5-15R
1650 joules
5-20P
15 ft.
36 in.
20A
SS480806
15A
8 x 5-15R
1650 joules
5-15P
6 ft.
48 in.
15A
SS7415-15
15A
16 x 5-15R
1650 joules
5-15P
15 ft.
48 in.
15A
SS7619-15
15A
24 x 5-15R
1650 joules
5-15P
15 ft.
72 in.
15A
14-10-111-9333D1.indb 3
11/6/2014 9:19:05 AM