2
Tripp Lite’s SRWOSHELFSM and SRWOSHELFLG are the perfect open frame rack solution for applications where space
is limited. Heavy-duty construction and a wall-mount form factor keep equipment out of the way. The SRWOSHELFSM
and SRWOSHELFLG accommodates all standard 19-inch rack-mount equipment.
Base Panel
Right Panel
Left Panel
Rear Panel
Top Shelf
(SRWOSHELFLG Only)
M5 x 8 Screw
(x12) SRWOSHELFSM
(x16) SRWOSHELFLG
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that must be followed during the installation and operation
of the product described in this manual. Failure to comply may invalidate the warranty and cause property
damage or personal injury.
• Keep the rack in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and
gasses, conductive contaminants and dust.
• Leave adequate space at the front of the rack for proper ventilation.
• Inspect the shipping container and the rack for shipping damage. Do not use the rack if it is damaged.
• Leave the rack in the shipping container until it has been moved as close to the final installation location as possible.
• Install the rack in a structurally sound area capable of handling the load, the weight of the rack, all equipment that will be
installed in the rack and any other equipment that will be installed nearby.
• Save all packing materials for later use. Repacking and shipping the enclosure without the original packing materials
may cause product damage that may affect the warranty.
• Do not attempt to install the rack unassisted.
• Do not attempt to install equipment without first wall-mounting and stabilizing the rack.
• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause
the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.
Introduction
Parts List
Important Safety Instructions