2
Preparation and Fabrication
Wire Tray Models and Dimensions
Before proceeding with fabrication, first confirm your wire tray model and dimensions.
Model
Sectional View
Height
Width
Depth
SRWB6210STR
2 in. (50 mm)
6 in. (150 mm)
10 ft. (3000 mm)
SRWB12210STR
2 in. (50 mm)
12 in. (300 mm)
10 ft. (3000 mm)
SRWB6410STR
4 in. (100 mm)
6 in. (150 mm)
10 ft. (3000 mm)
SRWB12410STR
4 in. (100 mm)
12 in. (300 mm)
10 ft. (3000 mm)
SRWB18410STR
4 in. (100 mm)
18 in. (450 mm)
10 ft. (3000 mm)
How to Cut Wire Trays
Notes:
• Always use side-action bolt cutters.
• Angle all cuts away from the new end.
• Cut each wire with one clean cut whenever possible.
• Remove any sharp edges to eliminate possible damage to cables.
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Cut the bottom wires first
with the underside of the tray
facing up in the order as shown:
To cut the side wires
, flip the wire tray over and cut in the
order shown, starting from the top:
Repeat as needed. For various wire cutting patterns and installation diagrams, refer to the documentation included with the
connectors and connector kits (sold separately).
19-04-073 93-3930_RevA
1
2
4
3
5
6
1
2
4
3
1
2
4
3
