Unit Dimensions
(HWD/in)
10.25 x 9 x 20.5
Unit Dimensions
(HWD/cm)
26 x 22.9 x 52.1
Material of
construction
Steel
Form factors
supported
Tower
Cooling method
Built-in cooling fan
Battery Access
User replaceable, hot-swappable battery replacement supported via front access panel
ENVIRONMENTAL
Relative Humidity
0 to 95%, non-condensing
Storage
Temperature
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Operating
Temperature
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Line mode BTU/hr.
(Max.)
1113 BTU/hr.
Battery mode
BTU/hr. (Max.)
1219 BTU/hr.
Audible Noise
COMMUNICATIONS
Network
monitoring port
Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact
closure monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto
shutdown features of Windows and Mac OS X.
Software and
cabling included
Yes, includes PowerAlert software CD-ROM and complete cabling
SNMP compatibility
Yes, includes slot for optional SNMPWEBCARD accessory (#SNMPWEBCARD)
WatchDog
compatibility
Yes, compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot
of application / OS or hard power off/on reboot of connected equipmentideal for unattended kiosk applications
LINE / BATTERY TRANSFER
Transfer time from
line power to
battery mode
Zero, online UPS continuously converts incoming AC to DC, then back to AC. When commercial power is interrupted,
UPS maintains continuous output from battery reserves with absolutely no disruption in output AC power.
Low voltage
transfer to battery
power
Maintains continuous operation during undervoltages as low as 65V (80V at load levels over 70%). Below this switchover
point, output is supported from battery derived AC power.
High voltage
transfer to battery
power
Maintains continuous operation without using battery power during overvoltages to 138V. Above this point, output is
supported from battery derived AC power.
SPECIAL FEATURES
EPO port
Supports "Emergency Power Off" via set of dedicated built-in EPO jacks
Cold Start
Yes, inverter can be "cold started" to enable temporary AC output during a power failure
Appearance
Attractive black steel rackmount housing
BATTERY PACK ACCESSORY (optional)
Battery Pack
Accessory
(optional)
BP72V28-3UNAFTA (optional)
CERTIFICATIONS
Certifications
Tested to UL1778 (USA), CSA (Canada), NOM (Mexico), Class A (emissions), FCC Part 68 / Industry Canada
(telecommunications), RoHS compliant
WARRANTY
