Hardwire input and output connections supported, DC input terminals for 24V battery connection
Converts 24V DC to 120V AC
Frequency control for operating stability
Advanced 10/30 amp selectable, 3-stage battery charger and selector switch for gel or wet cell batteries
Resettable circuit breaker protects APS against system overload
Switch allows user to select between off, auto-invert and charge-only settings
6 diagnostic LEDs indicate AC present, on battery, overload, & battery voltage level (high, medium, & low)
Configuration switches to allow the user to select the high and low voltage for the unit to automatically transfer from AC power to battery
backup
Coated internal circuit boards offer continuous operation in humid environments (0-95%, non condensing)
RJ45 port allows connection of APS remote switch (part#
APSRM4
)
Allows unlimited runtime capability by allowing the use any number of user-supplied batteries
Specifications
OUTPUT
Frequency
compatibility
60 Hz
Output watts
Continuous - 1500 watts, Overpower (up to 1 hour) - 2250 watts, Double-Boost wattage (up to 10 seconds) - 3000 watts
Output nominal
voltage
AC OUTPUT: 120VAC nominal, DC CHARGER OUTPUT (DC): 24VDC nominal
Output voltage
regulation
LINE POWER (AC): Maintains 120V nominal sine wave output. INVERTER POWER (AC): Maintains PWM sine wave
output voltage of 120 VAC (+/-5%). DC CHARGER OUTPUT (See battery recharge rate section)
Output frequency
regulation
60 Hz (+/- 0.3 Hz)
Overload
protection
Includes 15A input breaker dedicated to the charging system and 15A output breaker for AC output loads
Outlet quantity /
type
Hardwire AC output
INPUT
Recommended
Electrical Service
DC INPUT: Requires 24VDC input source capable of delivering 70A for the required duration (when used at full
continuous capacity). For automotive applications, professional hardwire installation with 125A minimum battery system
fusing is recommended.
Maximum input
amps / watts
DC INPUT: Full continuous load - 70A at 24VDC. AC INPUT: 26 amps at 120VAC with full inverter and charger load
Input connection
type
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate
Voltage
compatibility (VAC)
120
Voltage
compatibility (VDC)
24
BATTERY
Expandable
battery runtime
Runtime is expandable with any number of user supplied wet or gel type batteries
DC system voltage
(VDC)
30
Battery Pack
Accessory
(optional)
98-121
sealed lead acid battery (optional)
