Tripp Lite SmartOnline)
Advanced ATS configurations using separate mains circuits, backup generators and out of phase utility feeds are fully supported
On-board processor evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality
than the primary source
2-7 millisecond transfer time between primary and secondary inputs
DHCP/Manual configuration support; Supports HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2,
Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols
Compatible with optional ENVIROSENSE temperature monitor
Outlets are factory programmed for sequential turn-on at 250 millisecond intervals as the PDU is first energized
Front panel LEDs confirm power availability on primary / secondary inputs and each output receptacle
Specifications
OVERVIEW
PDU Type
Auto-Transfer Switch; Switched
OUTPUT
Frequency
compatibility
60 Hz
Output nominal
voltage
100-127V nominal, single phase
Outlet quantity / type
8 NEMA 5-15R
Outlet Type
NEMA 5-15R
Customized load
management
receptacles
8 individually controlled outlets
INPUT
PDU Input Voltage
100; 120; 127
Maximum Input Amps
(A)
15
Maximum Input Amps
(A) Details
15A maximum (Agency de-rated to 12A continuous)
PDU Plug Type
NEMA 5-15P
Input cord length (ft.)
12
Input cord length (m)
3.66
Voltage compatibility
(VAC)
120
Phase
Single-Phase
LEDS ALARMS & SWITCHES
Front panel LEDs
10 front panel LEDs display power on - off status for each outlet, plus 2 LEDs for power status on each input line
cord. Digital Current Meter display shows total output power consumption in amps.
PHYSICAL
Shipping Dimensions
(HWD/in)
6.25 x 22.5 x 23.5
Shipping Dimensions
(HWD/cm)
15.9 x 57.2 x 59.7
Shipping weight (lbs)
15.2
Shipping weight (kg)
6.9
