UPS Input cord length (m)
1.8
Recommended Electrical
Service
15A 120V
Input cord length (ft.)
6
Input cord length (m)
1.8
BATTERY
Full load runtime (minutes)
8 min. (940w)
Half load runtime
(minutes)
24 min. (470w)
DC system voltage (VDC)
36
Battery recharge rate
(included batteries)
Less than 8 hours from 10% to 90%
Replacement battery
cartridge (internal UPS
battery replacement)
RBC53
Battery Access
Battery access door
VOLTAGE REGULATION
Voltage regulation
description
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 75 to 147
Overvoltage correction
Input voltages between 128 and 147 are reduced by 12%
Undervoltage correction
Input voltages between 93 and 107 are boosted by 14%
Severe undervoltage
correction
Input voltages between 75 and 92 are boosted by 30%
LEDS ALARMS & SWITCHES
LED Indicators
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Alarms
Audible alarm indicates power-failure and low-battery conditions
Alarm cancel operation
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
Switches
2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
480
UPS AC suppression
response time
Instantaneous
EMI / RFI AC noise
suppression
Yes
AC suppression joule
rating
480
AC suppression response
time
Instantaneous
PHYSICAL
Installation form factors
supported with included
accessories
Tower
