![Tripp Lite NPOE-EXT-1G30WP Скачать руководство пользователя страница 3](http://html1.mh-extra.com/html/tripp-lite/npoe-ext-1g30wp/npoe-ext-1g30wp_owners-manual_1165525003.webp)
3
Single Extender Installation
Note:
Prior to connecting the RJ45 cable to input/output ports, install the included
water-resistant dust caps onto the cable. Caps can be screwed onto the end of the port
connection.
1.
Using a Cat5e/6 cable (up to 100 m / 328 ft. long), connect your
powered source device (such as a PoE switch) into the “IN” port on the
unit.
2.
Using another Cat5e/6 cable (up to 100 m / 328 ft. long), connect
your remote PoE powered device (PD) (such as VoIP or IP surveillance
camera) into the “OUT” port on the unit.
Note:
Your PoE source must meet or exceed IEEE 802.3at / 802.3af standards.
Please see
Maximum Supported Power
table for more information.
Single Extender Installation Diagram
Single Extender Installation with Midspan Diagram
Camera
PoE Extender
PoE
Switch
Max 100 m (328 ft.) Max 100 m (328 ft.)
Camera
PoE Extender
Switch
(Non-PoE)
Midspan
Max 100 m (328 ft.) Max 100 m (328 ft.)
Note:
Where external power is required, the power source (e.g.. midspan or PoE
injector) must be installed between the Ethernet switch (non-PoE source) and the first
NPOE-EXT-1G30WP extender.
18-12-180-9338F9.indb 3
4/17/2019 10:22:30 AM