46
error. If you still want to use this instance, you can change the Control VLAN to same as the
control vlan of the instance first. And then configures the instance.
4.5.1.1.
ERPS
4.5.1.1.1.
CLI Configuration
Node
Command
Description
enable
show erps
This command displays the ERPS configurations.
enable
configure terminal
This command changes the node to configure node.
configure
erps enable
This command enables the global ERPS on the
Switch.
configure
no erps enable
This command disables the global ERPS on the
Switch.
configure
erps ring-id <1-255>
This command creates an ERPS ring and its ID and
enter ERPS node.
configure
no erps ring-id <1-255> This command creates an ERPS ring and enter
ERPS node to configure detail ring configurations.
erps-ring
show
This command displays the configurations of the
ring.
erps-ring
control-vlan <1-4094> This command configures a control-vlan for the
ERPS ring.
erps-ring
guard-timer <10-2000> This command configures the Guard Timer for the
ERPS ring. (default:500ms)
erps-ring
holdoff-timer
<0-10000>
This command configures the Hold-off Timer for
the ERPS ring. (default:0 ms)
erps-ring
left-port PORTID type
[owner|neighbor|norm
al]
This command configures the left port and type for
the ERPS ring.
erps-ring
mel <0-7>
This command configures a Control MEL for the
ERPS ring.
erps-ring
name STRING
This command configures a name for the ERPS
ring.
erps-ring
revertive
This command configures the revertive mode for
the ERPS ring.
erps-ring
no revertive
This command configures the non-revertive mode
for the ERPS ring.
erps-ring
right-port PORTID type
[owner|neighbor|norm
al]
This command configures the right port and type
for the ERPS ring.
erps-ring
ring enable
This command enables the ring.
erps-ring
no ring enable
This command disables the ring.
erps-ring
Version (v1|v2)
This command configures a version for the ERPS
ring.
erps-ring
wtr-timer <5-720>
This command configures the WTR Timer for the
ERPS ring. (default: 300 seconds)
Содержание NGI-S05C2POE4
