Tripp Lite NGI-S04C2, Руководство пользователя

Страница: 114 / 138

114
Packet Rate This field displays the current threshold.
8. Management
8.1. SNMPv1/v2c
Simple Network Management Protocol
Simple Network Management Protocol (SNMP) is used in network management systems
to monitor network-attached devices for conditions that warrant administrative attention.
SNMP is a component of the Internet Protocol Suite as defined by the Internet
Engineering Task Force (IETF). It consists of a set of standards for network management,
including an application layer protocol, a database schema, and a set of data objects.
SNMP exposes management data in the form of variables on the managed systems, which
describe the system configuration. These variables can then be queried (and sometimes
set) by managing applications.
8.1.1. SNMP configuration
Allows user to enable and disable SNMP protocol globally, By default SNMP state will
be disabled, User can change the system name with respect to their requirement also can
add system location and contact location.
8.1.1.1. CLI Configuration
Node Command Description
enable show snmp This command displays the SNMP configurations.
configure snmp (disable|enable) This command disables/enables the SNMP on the
switch.
configure snmp system-name
STRING
This command configures a name for the system.
(The System Name is same as the host name)
configure snmp system-location
STRING
This command configures the location
information for the system.
configure snmp system-contact
STRING
This command configures contact information for
the system.
Example:

L2SWITCH#configure terminal

L2SWITCH(config)#snmp enable

L2SWITCH(config)#snmp system-contact IT engineer

L2SWITCH(config)#snmp system-location Branch-Office