3
3
Place the panel into position in an enclosure
or open frame rack. Align the mounting holes
and use rack-mounting screws (2 per side, not
included) to secure the unit.
4
To access the MPO cables, untighten the two handscrews
located on the rear of the unit
A
, lift the top panel
B
and flip down the rear access plate
C
.
Installation
3
4
Cables are
labeled per port
in both meters
and feet.
A
B
C
5
Locate the appropriate MPO cable. Remove the Velcro strap, uncoil and pull cable, as required. Excess cable slack can be
recoiled inside the panel.
5
Available rear-to-front
cable access.
21-05-082-933F25.indb 3
21-05-082-933F25.indb 3
10/22/2021 1:31:47 PM
10/22/2021 1:31:47 PM
