Tripp Lite BPA7524KIT, Инструкция

Страница: 3 / 20

3
1
Strip the wires using a
wire stripping tool.
Note: The recommended
length for the stripped
ends is ½ inch.
Connector Cable
Assembly Instructions
1
Contact Tripp Lite at tripplite.com/support if you do not have the connectors
and terminals. If you need replacements, request the kit listed below:
UPS Model Kit Number Kit Includes
SMART1524ET BPA7524KIT (x2) 6 AWG DC Terminals
(x1) Red DC Connector Housing
(x1) Black DC Connector Housing
SMART1548ET BPA7548KIT (x2) 8 AWG DC Terminals
(x1) Red DC Connector Housing
(x1) Black DC Connector Housing
CAUTION: Assembly and installation should be performed by
qualified professional electrical service personnel only.
The user-supplied DC cables have a maximum recommended length of 2 m
(6.65 ft.). Use stranded copper conductors only.
Model SMART1524ET (24V UPS System): Use minimum 6 AWG wire,
rated to 105°C (221°F).
Model SMART1548ET (48V UPS System): Use minimum 8 AWG wire,
rated to 105°C (221°F).
Ground Wire (both models): Use minimum 12 AWG wire, rated to 105°C
(221°F).
Use a
RED wire for the POSITIVE supply.
Use a BLACK wire for the NEGATIVE supply.
Use a GREEN wire for the GROUND wire.
BLACK
RED