BATTERY CHARGE:
This red light will turn ON continuously
after the UPS runs a self-test to indicate that the UPS’s battery is
weakly charged. If it remains lit after you have allowed the UPS to
charge for twelve hours and run a second self-test, contact Tripp Lite
for service.
6
Basic Operation
continued
Other UPS Features
AC Receptacles
“UPS/Surge” receptacles are used to provide your connected
equipment with AC line power during normal operation and battery
power during blackouts and brownouts. They also protect your
equipment against damaging surges and line noise. “Surge-only”
receptacles (identified on the back of the UPS) are used to provide
peripherals with surge protection without committing precious
battery power to support them during blackouts.
RJ45 Phone Jacks
These jacks protect your equipment against surges over a telephone
line. Connecting your equipment to these jacks is optional. Your UPS
will still work properly without this connection.
USB Port
The USB port connects your UPS to any USB workstation or server.
Using this port, your UPS can communicate line-fail and low-battery
status to your computer. Use with Tripp Lite software and any USB
cable to automatically save open files and shut down equipment during
a blackout. Contact Tripp Lite Customer Support or consult your
power protection software manual for more information.
Battery Replacement Door
Under normal conditions, the original battery in your UPS will last
several years. Battery replacement should be performed only by
qualified service personnel. Refer to “Battery Warnings” in the Safety
section on page 2.
200202076 93-2031 BC PRO600 Owner’s Manual.qxd 5/22/02 4:32 PM Page 6