4
Single-Stage Installation
Note: Test to make sure the entire installation works properly before pulling cables
through ceilings/walls.
1
Connect your computer to the
Source port on the B132-004 using a
VGA cable.
2
(Optional) Connect a local monitor to the
Local port on the B132-004
using a VGA cable.
3
Connect the power supply to the B132-004 and plug it into an
appropriate power source.
4
Connect the B132-004 Local Unit to a B132-100 Remote Unit (sold
separately) or B132-100-WP Wallplate (sold separately) using Cat5e/6
cable. One B132-100 or B132-100-WP is required for each
Output port
on the B132-004 Local Unit.
Note: Remote connection methods will
vary. (See the B132-100 or B132-100-WP Owner’s Manual for details.)
5
Follow the instructions in the Owner’s Manual that comes with your
B132-100 Remote Unit or B132-100-WP Wallplate to complete the
installation.
B132-100
B132-004
B132-100-WP
