36
USB/IR Controls and Toslink Installation
Select extender kits provide the following functional controls:
• USB 1.1 – One Micro-USB input at transmitter, dual USB-A
outputs at receiver
• Bi-Directional IR – Dual 3.5 mm jacks at both the transmitter
and receiver
• Toslink output at receiver and transceiver
(Optional)
Connect the included IR-OUT cable to the transmitter
unit’s IR-OUT port. Place the sensor on the IR-OUT cable in
an unobstructed area within clear view of the device being
controlled. Then connect the included IR-IN cable to the receiver
unit’s IR-IN port. The IR-IN cable will communicate the desired
command via the transmitter’s IR-OUT cable.
Note:
The IR-OUT cable receives the signal from the remote control and
sends it to the device being controlled (e.g. Blu-ray player, etc.).
(Optional for B127A-1A1-BHBH only)
With a user-supplied
USB Micro-B cable (such as Tripp Lite U050-XXX Series USB
cable), connect to the transmitter’s Micro-B port. Then connect a
keyboard and mouse to the available USB-A ports on the receiver
unit. The USB and IR functions can be selected via DIP switch on
the front of the transmitter unit.
(Optional)
Using a Toslink cable (such as Tripp Lite A102-XXM
Series cables), connect the Toslink cable to a set of speakers,
an audio receiver or other audio system equipped with Toslink
digital outputs.
21-03-127-933CC9-EN.indd 36
21-03-127-933CC9-EN.indd 36
3/24/2021 9:38:16 AM
3/24/2021 9:38:16 AM
