7
Extender/Splitter Installation
1.
Connect the HDMI source to the INPUT port on the B126-002 or
B126-004 using a Tripp Lite P568-Series HDMI Cable.
2.
Optional for B126-004:
Connect an HDMI monitor to the LOCAL
port on the B126-004 using a Tripp Lite P568-Series HDMI Cable.
3.
Connect the external power supply to the transmitter unit and plug
it into a Tripp Lite Surge Protector, PDU or UPS. The green LED
illuminates to indicate the unit is receiving power from the external
power supply.
4.
Using Cat5e/6 cable, connect one of the RJ45 output ports on the
transmitter unit to the RJ45 input port on the B126-1A0-U.
5.
Connect the B126-1A0-U to a monitor using its built-in HDMI Cable.
6.
Connect the included USB Micro-B cable to the port on the
B126-1A0-U and a USB port on the display or a USB wall outlet. The
green LED will illuminate, indicating the unit is receiving power from
the USB Micro-B port.
7.
Repeat Steps 4-7 for each additional B126-1A0-U in the installation.
8.
Turn on the power to the HDMI source and HDMI displays. The orange
RJ45 LEDs illuminate on both transmitter and receivers to indicate
the unit is receiving a signal from the source. The screen should now
be displayed on the connected monitors.
9.
If necessary, use the Equalization control on the B126-1A0-U to
adjust the video image.
Note:
An improper Equalization setting can cause the monitor to display
no picture at all. Try each Equalization setting until an acceptable picture is
displayed.
16-12-182-9334F6.indb 7
1/4/2017 4:40:05 PM
