2
Installation
Notes:
1. Test to make sure the entire installation works properly before pulling cables through ceilings/
walls.
2. The B121-000 has been designed for use with Tripp Lite P580-Series DisplayPort cables. To
ensure maximum distance and performance, it is recommended that you use Tripp Lite P580-
Series DisplayPort cabling. For distances over 100 ft., 24Awg cable is required (Available from
Tripp Lite as a custom order).
DISPLAYPORT
EXTENDER
Model: B121-000
SOUR
CE
DISPLA
Y
1
Connect the longer DisplayPort cable between the source and the
Source
port on the
B121-000.
Note
: When transmitting a 1920 x 1080 (60Hz) signal, the DisplayPort cable connecting the
source to the B121-000 must be no longer than 150 ft. For distances over 100 ft., 24Awg cable
is required (Available from Tripp Lite as a custom order).
2
Connect the shorter DisplayPort cable between the monitor and the
Display
port on the
B121-000.
Note
: The DisplayPort cable used to connect the monitor to the B121-000 must be no longer
than 16 ft. (5 m).
3
Connect the external power supply to the B121-000, and plug it into a Tripp Lite Surge
Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS).
4
If necessary, use the equalization control to adjust the video image. Next to the
equalization control is a switch labeled S / L, which stands for
Short
and
Long
. When
adjusting the equalization, if you go through each setting without achieving an
acceptable image, flip this switch to the other setting. This provides a new range of
equalization settings to go through until an acceptable image is displayed.
Note
: An improper Equalization setting can result in no image being displayed at all. Try each
setting until an acceptable image is displayed.
12-366 93-3236.indd 2
9/10/2012 5:08:32 PM
