54
Changing the Hotkey:
By default, the hotkey combination used to open the OSD is [Shift] + [Shift]. You can change this hotkey in the
F2 – SETTING
menu to use
any of the following.
Note:
The left [Shift] hotkey must be used; the right [Shift] key will not work. If you set the hotkey to [Ctrl] + [Ctrl] or
[Ctrl] + [F11], the left [Ctrl] key must be used.
•
[Shift] + [Shift]
•
[Ctrl] + [Ctrl]
•
[Ctrl] + [F11]
•
[Print Screen] + [Print Screen]
To change the hotkey:
1. In the
F2 - SETTING
window, navigate to the
Hotkey
field.
2. Press the [Spacebar] key to toggle between the available options.
3. After choosing the desired hotkey, press the [Esc] key to exit the
F2 – SETTING
window.
To change the keyboard language:
By default, the keyboard language is preset to US English. You can change the keyboard language to French (FR) or German (DE).
Note:
This refers to the OSD keyboard language and not the computer keyboard language.
To change the keyboard language:
1. In the
F2 - SETTING
window, navigate to the
Keyboard Language
field.
2. Press the [Spacebar] key to toggle between the available options.
3. After choosing the desired language, press the [Esc] key to exit the
F2 – SETTING
window.
4. Local Console
Inputing and Updating DDC Information:
Display Data Channel (DDC) is a VESA standard for communication
between a monitor and a video adapter. The SIU emulates the DDC
information to the connected computer. When first installing the
NetCommander IP system, emulate the DDC information of the
connected monitor into the memories of all connected SIUs.
To input the DDC information:
1. In the
F2 - SETTING
window, press the [F10] key. The text
“Please wait” flashes a few times and disappears. The monitor’s
DDC information is sent to all SIUs.
You should update the DDC information in any of the following
circumstances:
•
When replacing the monitor connected to the NetCommander IP
•
When adding a new SIU to the system
•
When reconnecting an existing SIU that was temporarily used in a
different system
