6
Operation
Command
Hotkey
Description
Unbind Computer
and Hub
Switching
[Scroll Lock]
[Scroll Lock] [X]
Unbinds computer and hub switching,
allowing access to one computer while
the focus of the hub is on the other.
Bind Computer
and Audio
Switching
[Scroll Lock]
[Scroll Lock] [Q]
Binds computer and audio switching
together. This is enabled by default.
Unbind Computer
and Audio
Switching
[Scroll Lock]
[Scroll Lock] [W]
Unbinds computer and audio switching,
allowing access to one computer while
playing audio from the other.
Next Lower
Computer Port
[Scroll Lock]
[Scroll Lock] [
h
]
Switches the KVM focus to the
computer directly prior to the currently
selected computer.
Next Active
Lower Computer
Port
[Scroll Lock]
[Scroll Lock]
[Backspace]
Switches the KVM focus to the next
active computer directly prior to the
currently selected computer. If a
computer is not connected to a port, or
if the connected computer is powered
off, it will be skipped.
Next Higher
Computer Port
[Scroll Lock]
[Scroll Lock] [ ]
Switches the KVM focus to the
computer directly after the currently
selected computer.
Define Hotkey
Preceding
Sequence
[Scroll Lock]
[Scroll Lock] [H]
[x] x = [Scroll
Lock], [Caps
Lock], [Num
Lock], [Esc],
[F12], Left [Ctrl],
and Right [Ctrl]
Selects which key will be used for
the hotkey preceding sequence. The
default is [Scroll Lock].
Note:
The Hotkey Preceding Sequence
can also be changed using the front panel
buttons. Press and hold down the highest
number button (2 or 4) until you hear two
beeps. After the two beeps, release the
button and press the key that you wish to use
for the Hotkey Preceding Sequence.
Auto Scan
[Scroll Lock]
[Scroll Lock] [S]
Initiates an Auto Scan at a scan
interval of 10 seconds.
15-05-047-933455.indd 6
5/7/2015 4:20:53 PM
