5
Hardware Installation
Connecting the Console
1. Power off all computers.
2. Connect your PS/2 keyboard and mouse directly to the PS/2 keyboard and mouse ports (female)
of the KVM.
3. Connect the VGA video connector to your monitor.
4. (Optional) Connect your speakers to the console's audio port.
Connecting the Computers
1. Connect the KVM's built-in PS/2 keyboard and mouse cables to the PS/2 ports on your computer.
2. Connect the KVM's VGA video connector to your computer.
3. (Optional) Connect the built-in audio jack to the audio port on your computer.
4. Repeat Steps 1 to 3 for your second computer.
5. Power on your computers and refer to the "Operation" section.
WARNING: Before connecting or disconnecting your devices to the
KVM switch, make sure your devices are powered off. Also make sure
that your devices are properly grounded before installation to prevent
damage. Failure to follow these instructions will void your product
warranty. Tripp Lite will not be responsible for damage to improperly
grounded equipment.
200608008--93-2604 inline KVM Switch manual.qxd 8/23/2006 2:45 PM Page 5
