18
8. Once the orange light turns ON and a beep sounds, continue moving the
device within one working section using the same slow circular motions for
a few moments and then move to an adjacent working section. The new
working section now includes the heated section and the new section,
thus enlarging the area. You may want to start your treatment by treating
the section at the jaw line, and then moving to the nasal area and so on,
moving from the bottom to the top of your face (Fig.17).
The device’s automatic temperature-optimization mechanism protects the
skin from overheating. After the skin has reached the maximal treatment
temperature, the green indicator light goes OFF and the orange indicator
light goes ON to indicate that the energy source has been automatically
shut down. The device automatically turns itself back ON when the skin
temperature drops below the optimal temperature or when you move the
device to an adjacent treatment area where the skin temperature is lower.
As you move from one section to another, the orange indicator light
turns OFF if the temperature of the skin in an area is not warm enough.
This is normal. Therefore, as you work within one working section and
move back to the previous section, you maintain the heat in that area
too. In this way, as you move back and forth between working sections,
you are able maintain the heat in both sections for as long as possible.
WORKING
SECTIONS
TREATMENT
AREA
FIG.16
FIG.17
FIG.15
