2.9
This tester is not for use by children. Failure to observe
this precaution may result in damage to the tester or
injury to the user.
2.10 Do not use this tester to make measurements in adverse
environments such as rain, snow, fog, or locations with
steam, explosive gases or dusts.
2.11 Do not use tester in condensing atmospheres. That is, do
not use tester in conditions where ambient temperature
and humidity could cause condensation of water inside of
the tester.
2.12 Do not use this tester if it is wet, either from exposure to
the weather, or after cleaning the case of the tester.
2.13 Do not attempt immediate use of the tester when bringing
it from a cold environment to a warm environment.
Condensation of water, inside and outside of the tester,
may produce dangerous measuring conditions. Allow the
tester to warm to room temperature before using.
2.14 Do not modify this tester. Changing the design may make
the tester unsafe and may result in injury to the user.
2.15 Do not use the tester if it has undergone long-term
storage under unfavorable conditions.
2.16 Do not use the tester if it may have been damaged in
transport.
2.17 Avoid usage near strong magnetic fields (magnets,
loudspeakers, transformers, motors, coils, relays,
contactors, electromagnets, etc.). The tester may display
readings that are in error.
2.18 Avoid usage near strong electrostatic fields (high voltage
power lines, televisions, computer monitors, etc.). The
tester may display readings that are in error.
2.19 Avoid usage near strong RF fields (radio or television
transmitters, walkie talkies, cellular phones, etc.). The
tester may display readings that are in error.
2.20 Remove the battery when the tester may be left unused
for longer than 1 month. Chemical leakage from the
battery could damage the tester.
2.21 Do not use the tester if there is evidence of chemical
leakage from the battery.
-3-
