Battery replacement
The meter uses a 9V battery (supplied) as a power source. If the green LED
does not light when the ON/OFF button is pressed, replace the battery.
1.
Place the meter on a clean, flat, non-abrasive surface.
2.
Loosen the rear bottom Phillips head screw to access the battery
compartment.
3.
Lift the battery access door and replace the 9V battery observing
polarity.
4.
Place the battery carefully in the compartment without crimping
the black and red battery connecting wire.
5.
Close the access door and secure the screw.
You, as the end user, are legally bound (
Battery ordinance
) to
return all used batteries and accumulators;
disposal in the
household garbage is prohibited!
You can hand over your used batteries / accumulators at
collection points in your community or wherever batteries /
accumulators are sold!
Disposal:
Follow the valid legal stipulations in respect of the
disposal of the device at the
end of its lifecycle
Specifications
Environmental Specifications
Operating Temperature
0 to 40
o
C (32 to 104
o
F)
Operating Humidity
15 to 80% relative humidity
Operating altitude
2000m
Pollution Degree
2
Approvals
DIN / VDE 0411
IEC 61010
DIN / VDE 0413-7
