LazerTape 160 Users Manual
Indirect Measurement - Determining a Distance Using 3 Measurements
(
See Figure H
)
Press this button
twice; the display shows the double pythagoren
symbol
. The distance to be measured (1) flashes in the symbol.
Aim at point (1) and trigger the measurement. After the first
measurement, point at (2), establishing a right angle.
Press to measure point (2). Aim laser at point (3)
Press to measure point (3).
The total height is displayed on the 3rd line.
Historical Storage
Press to review the previous 20 records. Press button repeatedly to cycle
through the memory, or use
or
buttons to navigate through the
records.
All of the records can be cleared by pressing the Memory and Clear buttons
simultaneously.
14
3
2
1
Figure H
