Screen Cleaning & General Care
Do not use solvents when cleaning the screen as they may cause damage; clean with a
soft cloth. Do not expose the Monitor to wet/damp/humid, dusty, or excessively hot or
cold environments or leave it in direct sunlight. Make sure all connections are free of dirt
and debris at all times. Do not block vents. Only use the supplied power supply. Turn
power off when not in use.
NOTE: The HDMC3 will not work directly connected to HD Analog Cameras or
anything that uses proprietary encoding.
Quick Start
K START GUI
How to display video
Plug the AC adapter into a wall outlet, and then connect it to the HDMC3. The HDMC3
will automatically turn the screen on and attempt to show video. Next, connect your
video source to the appropriate connection on the top of the HDMC3. If you see a “No
Signal” message on the screen, press the Input Selector button on the top to access that
menu, then press it again to scroll through the AV, BNC, HDMI, and VGA options. Once
you have highlighted the connection type you are using, press one of the Arrow buttons
to select it. Your video should now display.
Adjusting brightness, contrast, etc.
Press the Screen Controls Menu button to access the menu. There will be four primary
icons on the top row—a Color Wheel icon, a Speaker icon, a Screen Shift icon, and an
Advanced Settings icon (the one with the clock). Use the Left and Right Arrow buttons to
highlight/ select one of the menus. Then use the Input Selector button to scroll down the
list of Settings. When you have highlighted the setting you want to adjust, use the Arrow
buttons to make the change. Once you have made the change, select the Screen Controls
button again to save it.
IMPORTANT NOTE ABOUT POWER & CHARGING THE BATTERY
There is a built-in rechargeable battery. Therefore, leaving the Battery Engage/Disengage
Switch in the ON position will drain the battery even when the screen is not ON. Be sure
to turn off the Battery Engage/Disengage Switch during transport or when the HDMC3 is
not in use. Always use the AC power adapter if you set up the HDMC3 in a permanent
location, or plan to run it continuously for more than an hour.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
