5
Адрес:
Оперативные чаты (Whatsapp, Viber):
Москва, ул. Римского-Корсакова, 1
+7 (903) 798-48-79
Notes for BMW:
an additional mode of the adapter (BMW spec.mode (park)). This mode
should be used if you want to change the volume of the signal (parking sensors and system
messages). Read more about this mode in the Applications.
Notes for Mercedes Benz (only for Comand NTG2.5):
- It is necessary to activate function “Rearseat entertainment”.
Notes for Volvo and Land Rover
(if you have activated component protection):
Before connecting the adapter must be assigned to the adapter serial number (a marker of
activity of the protection components is the cessation of broadcast audio adapter in 20-40
seconds after turning on the system).
For the assignment you need to set the jumpers to position «Read Serial Number», then,
not disconnect the original amplifier, connect the adapter to the optical interface MOST and
turn on audiosystem. After you enable the adapter «read» the serial number of original
amplifier and store it in its non-volatile memory. This procedure usually takes less than 20
seconds, a sign of the end of the procedure «Read Serial Number» is the formation of pulses
with an interval of 1 second on the line Remout (blue wire). After that you should disable
original amplifier, set the jumpers to a position corresponding to the car and use the audio
interface in the system instead of the original amplifier.
Chapter 3. How does the adapter
When you turn on the original head unit audio interface "MOST-TosLink" is initialized in
the interface MOST like a original amplifier and emulates his work, takes information from
the head unit about the regulations and forms necessary messages to the head unit. After all
the sound interface circuit enters the working state and the broadcast audio signal to a
TosLink output, a control voltage is generated at the output of the Remout.
When you turn off the system first retracts the control voltage from the output of the
REMOUT, then the audio circuit are transferred to the standby mode, thus avoiding indirect
clicks when switching on and off.
Module of frequency correction in the adapter is automatically disabled when the middle
position of regulators of tones of the system.
Adapter "MOST-TosLink" is in "sleep" mode when the interface is "MOST" inactive as other
components of the system MOST, while consuming approximately 0.5 mA.