5
lCd diSplay
The model number, IP address and subnet mask of the MC664 are shown on the LCD display for a few seconds after power-up.
The factory default IP address is 192.168.0.250. This can be changed using the ETHERNET or the
IP _ ADDRESS
command via
Motion
Perfect.
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
ENABLE
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Display at start-up
Display with WDOG on
adding eXpanSiOn MOduleS
Unscrew the lower retaining fixing (A) using
the supplied tool or a coin.
Remove the covers from the module (B).
Swing the expansion module (C) out from the
rear and unclip from the front end.
Replacing the module is the reverse of the
procedure.
Remove covers (E) before fitting full height
expansion modules.
To access the recovery mode switch, insert
screwdriver under the frontmost ventilation
slot (D). See the Hardware Manual for
details of recovery mode operation.
b
Recovery
Normal
C
d
a
e
e
