Trinnov Audio D-MON 12, Руководство пользователя

Страница: 78 / 95

7.5.6 STUDIO SETUP -> REMOTES
This tab sets the GPIO mappings for external controllers and the optional USB Volume controller.
MPIO General Purpose Inputs & Outputs
These fields will map a D-Mon processor function to a General Purpose Input or Output (GPI or GPO). There are two GPIs and one
GPO available. The physical connections are made via the MPIO connector. See
9.1.2: Multi-Purpose In/Out (MPIO) SubD-25
Connector
for wiring information.
In each case, click on a field and choose a function from the drop-down menu.
You can choose from:
•
Talkback #1
or
Talkback #2
– the GPI will trigger the
TB1
or
TB2
button. See 7.1.8 Talking to an Output.
•
Mute or Dim – the GPI will mute or dim the speakers. See 7.1.4: Adjusting the Listening Level (Speaker Volume) .
•
AES Insert
– the GPI will switch the AES Insert in and out of the circuit. See
7.1.10: Switching the AES 1-8 Insert
.
For the GPO, you have the same options as above, but this time the output will be triggered by the function - for example, to
illuminate a talk button when talkback is active.
Griffin Powermate controller
These fields configure the button and wheel on the USB Volume controller.
•
Click on the first field to define the button - you can choose either :
o
to Mute the speakers
o
to trigger a talkback button (
TB #1
or
TB #2
), as Toggle or Momentary mode
o
to cycle thru speaker sets
o
to toggle the AFL/PFL source
o
to toggle the AES insert
•
Click on the second field to set the sensitivity of the wheel.
This is always mapped to the speaker level (volume).
If more than one USB Volume controller is connected, then all devices are assigned the same functionality.