Trinity TLS-7202, Руководство пользователя, Страница: 3 / 12

ASSEMBLY INSTRUCTIONS
Find the WOOD TOP (A) box inside the package and place it tape-side up
on a flat smooth surface on the ground. Make sure there is enough space
to open and unfold the box.
Open the WOOD TOP (A) box carefully keeping the WOOD TOP (A) laying
face down inside. Unfold the box to use as a work surface.
Place both TOP CROSS BEAMS (B) on WOOD TOP (A). Make sure holes on
the “L” brackets at the end of the beams are on the outside.
STEP 1
B (2)
G
B
E
F
B
D
G
G
F
F
G
F
G
F
G
F
G
F
G
A
A (1)
Only hand tighten LARGE BOLTS (F). Do
not fully tighten with WRENCH (J) until
after WOOD TOP (A) is fully secured after
Step 4.
© 2017 TRINITY - 800.985.5506
2
F
Take RIGHT (D) and LEFT (E) SIDE FRAMES and orient parts as shown.
For proper installation, please make sure that the holes for the CROSS BEAMS
(B+C) in the RIGHT (D) and LEFT (E) SIDE FRAMES are on the inside.
STEP 2
F (8) G (8) D+E (2)
Hand tighten (2) LARGE BOLTS (F) through (2) LARGE WASHERS (G) and TOP CROSS BEAM (B) onto
RIGHT SIDE FRAME (D). Hand tighten (2) more LARGE BOLTS (F) through (2) more LARGE WASHERS (G)
and TOP CROSS BEAM (B) onto LEFT SIDE FRAME (E).
Repeat these steps to attach the other TOP CROSS BEAM (B) to the other side of SIDE FRAMES (D+E).