ASSEMBLY INSTRUCTIONS
STEP 1
Take (4) THREADED INSERTS (C) and
screw each into one end of POLE (B),
turning clockwise to screw in place.
Take (4) FEET LEVELERS (D) and screw
each into THREADED INSERT (C) that
were screwed into POLE (B), turning
clockwise to screw in place.
STEP 2
D(4)
B(4)
C (4)
G (8)
A (1)
A
G
G
B
Note that POLES (B) have slight horizontal line indentations at 1” intervals. Each
SLIP SLEEVE (G) has raised horizontal lines inside designed to lock them in place on
POLES (B).
C
B
D
B
Option 1
6-Tier Shoe Rack
Note:
•
Level side of SHELF (A)
is TOP side (TRINITY
logo on corner
cylinders should be
right-side up.)
•
Use a rubber mallet, if
needed, to secure
SHELF (A).
Place SHELF (A) on its side and slide each assembled POLE (B) through each corner cylinder on
SHELF (A). Make sure SHELF (A) corner cylinders are positioned over SLIP SLEEVES (G).
Stand the unit upright.
On POLE (B), place one pair of SLIP SLEEVES (G) at desired height
no higher
than 3rd indentation
from bottom. Please make sure arrow faces up and word “TOP” is right side up. Slide pair of SLIP
SLEEVES (G) until you hear a click to confirm pair is locked onto POLE (B). Do this for each POLE (B)
and make sure height is identical for each POLE (B). Do NOT place more than one pair on each pole
at a time.
© 2021 TRINITY - 800.985.5506
3