INSTALLATION INSTRUCTIONS
–
In Cabinet
Place CABINET MOUNTING TEMPLATE (G) inside your
cabinet. Using a pencil, mark the location where you plan
to install the CABINET SCREWS (F).
•
To ease the installation you can pre-drill small holes at
the marked locations.
Identify LEFT & RIGHT SLIDES (B) & (C).
•
Note that the BACK end of each SLIDE (B) & (C) has a black tip
and the FRONT end does NOT.
Place LEFT & RIGHT SLIDES (B) & (C) in their proper orientation
and desired position inside the cabinet.
B (1)
C (1)
F (4)
G (1)
© 2018 TRINITY - 800.985.5506
2
STEP 1
STEP 2
Extend the SLIDES (B) & (C) slightly and align the center of the oval slots to your marking in the cabinet.
Use the self-tapping CABINET SCREWS (F) to fasten the LEFT & RIGHT SLIDES (B) & (C) in your cabinet.
FRONT
BACK
