ASSEMBLY INSTRUCTIONS
STEP 1
G (1)
K (7)
E (1)
C (1)
K
© 2020 TRINITY - 800.985.5506
2
L
L (1)
NOTE: Make sure you have parts labeled (C), (E) and
(G) for this step. They look very similar to parts (D),
(F), and (H).
Lay SEAT (A) on ground sideways as shown, orient (3)
insert nuts on LEFT FRONT LEG (E) to align with (3)
holes on SEAT (A). Insert (3) SCREWS (K), from inside,
through SEAT (A) and hand fasten to LEFT FRONT LEG
(E). Then with HEX KEY (L) tighten (3) SCREWS (K).
Orient (2) insert nuts on LEFT SUPPORT (G) to align
with (2) holes on SEAT (A). Insert (2) SCREWS (K),
from inside, through SEAT (A) and hand fasten to LEFT
SUPPORT (G). Then with HEX KEY (L) tighten (2)
SCREWS (K).
Put LEFT ARMREST (C) on LEFT FRONT LEG (E) and
LEFT SUPPORT (G), making sure holes are aligned with
insert nuts. Insert SCREW (K) through LEFT ARMREST
(C) and hand fasten to LEFT FRONT LEG (G). Insert
SCREW (K) through LEFT ARMREST (C) and hand
fasten to LEFT SUPPORT (G). Finally tighten both
SCREWS (K) with HEX KEY (L).
A(1)
Completed STEP 1 assembly
G
C
A
E
2
1
2
3
K
K