Trinity ECOSTORAGE TBFZ-0910, Руководство пользователя, Страница: 3 / 12

© 2017 TRINITY - 800.985.5506
ASSEMBLY INSTRUCTIONS
STEP 1: SLIP SLEEVES
STEP 2: INSTALLING BOTTOM SHELF
2
A (4) D (8)
C (1)
Place SHELF (C) on its side and slide the (4)
BOTTOM POLES (A) through the holes in the
SHELF (C). Make sure that the SHELF (C)
corner cylinders are positioned over the SLIP
SLEEVES (D).
Stand the unit upright.
*Note: The level side of the SHELF (C) is the
TOP side (the TRINITY logo on the corner
cylinders should be right-side up.)
**Use a rubber mallet, if needed, to secure
the SHELF (C).
For easiest assembly, do not attach the TOP (B) and
BOTTOM (A) POLES until instructed. Once connected,
these will be the posts for the Rack.
Note that each POLE (A+B) has slight horizontal line
indentations at 1” intervals. Each SLIP SLEEVE (D) has
raised horizontal lines inside designed to lock them in
place on the POLE (A+B).
On the BOTTOM POLE (A), place 1 pair of SLIP SLEEVES (D)
at the desired level. Please make sure the arrow faces up
and that the word “TOP” is right side up. Do this for each
BOTTOM POLE (A) and make sure that the heights are
identical for BOTTOM POLE (A).
Slide the pair of SLIP SLEEVES (D) until you hear a click to
confirm the pair is locked onto the BOTTOM POLE (A). DO
NOT place more than one pair on each POLE (A) at a time.
* For safety and stability, the lowest SHELF (C) should be lower than the 3
rd
notch from the bottom.
** Note: There will be a very small gap in-between the SLIP SLEEVES (D) — this is normal.