© 2020 TRINITY - 800.985.5506
2
STEP 2
H (8)
ASSEMBLY INSTRUCTIONS
STEP 1
J (2)
K (1)
I (2)
A (4)
Screw CASTERS (I & J) into each BOTTOM POLE
(A). Turn clockwise to screw in place.
Use provided WRENCH (K) to tighten
completely. Failure to do as instructed could
result in caster stem breaking.
On BOTTOM POLE (A), place 1 pair of SLIP SLEEVES (H) at
desired height
no higher than
3
rd
indentation from
bottom. Make sure arrow faces up and word “TOP” is
right-side up. Do this for each BOTTOM POLE (A). Make
sure SLIP SLEEVES (H) height is identical for each
BOTTOM POLE (A).
Note that each POLE (A & B) has slight horizontal line
indentations at 1” intervals. Each SLIP SLEEVE (H) has
raised horizontal lines inside designed to lock in place on
POLE (A & B).
Slide pair of SLIP SLEEVES (H) until you hear a click to
confirm pair is locked onto BOTTOM POLE (A). Do NOT
place more than one pair on each POLE (A & B) at a time.
Note: There will be a very small gap in-between two locked SLIP SLEEVES (H)
—
this is normal.
A
I
J
K
K
A
H
A
H
