Trinity BASICS TBFPB-0934, Руководство пользователя

Страница: 4 / 12

© 2020 TRINITY - 800.985.5506
ASSEMBLY INSTRUCTIONS
3
C (1)
D (8) C (1)
Place SHELF (C) on its side and slide (4) BOTTOM POLES (B)
through the holes in SHELF (C). Make sure that SHELF (C) corner
cylinders are positioned over SLIP SLEEVES (D).
Stand the unit upright.
Note:
•
The level side of SHELF (C) is the TOP side (the TRINITY logo
on the corner cylinders should be right-side up.)
•
Use a rubber mallet, if needed, to secure SHELF (C).
•
For convenience, place BOTTOM POLES (B) with Locking
Casters on the long side of the shelf if the rack will be pushed
against a wall OR if the rack is frequently rolled around like a
cart place BOTTOM POLES (B) with Locking Casters on the
side being pushed or pulled.
On BOTTOM POLE (B), place 1 pair of SLIP SLEEVES (D) at the
desired height between SHELVES (C). Please make sure the
arrow faces up and that the word “TOP” is right side up. Do
this for each BOTTOM POLE (B), and make sure that the
heights are identical for each BOTTOM POLE (B).
Lower SHELF (C) over BOTTOM POLES (B) so that the corner
cylinders of SHELF (C) are positioned over SLIP SLEEVES (D).
Repeat Step 4 to install other SHELVES (C) as desired.
Note: Use a rubber mallet, if needed, to secure SHELVES (C).
STEP 3
STEP 4