Trinity 3-Tier Slat Shelving Rack, Руководство пользователя, Страница: 3 / 8

ASSEMBLY INSTRUCTIONS
* For safety and stability, the lowest shelf should be lower than the 3
rd
notch from the bottom.
** Note: There will be a very small gap in-between the SLIP SLEEVES — this is normal.
Each POLE (A) has slight horizontal line indentations at
1” intervals. Each SLIP SLEEVE (C) has raised
horizontal lines on the inside, designed to lock them in
place on the POLE (A).
On each POLE (A), place 1 pair of SLIP SLEEVES (C) at
the desired level. Please make sure the arrow faces
up and that the word “TOP” is right side up. Do this
for each POLE (A), and make sure that the heights are
identical for each POLE (A).
Slide the pair of SLIP SLEEVES (C) until you hear a click
to confirm the pair is locked onto the POLE (A). DO
NOT place more than one pair on each POLE (A) at a
time.
Place SHELF (B) on its side and slide the (4)
BOTTOM POLES (A) through the holes in the
SHELF (B). Make sure that the SHELF (B)
corner cylinders are positioned over the SLIP
SLEEVES (C).
Stand the unit upright and install the
remaining (2) SHELVES (B).
**Use a rubber mallet, if needed, to secure
the shelves.
3
STEP 1: SLIP SLEEVES
STEP 2: INSTALLING SHELVES
A (4) C (8)
C (16) B (3)
*Note: The level side of the SHELF (B) is the
TOP side (our logo on the corner cylinders
should be right-side up.)