TRINITY Pro TBFPBA-0926, Руководство пользователя, Страница: 3 / 12

© 2020 TRINITY - 800.985.5506
ASSEMBLY INSTRUCTIONS
2
A (4) D (8)
C (1)
STEP 1
STEP 2
Note: There will be a very small gap in-between two locked SLIP SLEEVES (D) — this is normal.
For easiest assembly, do not attach TOP POLES (B) and
BOTTOM POLES (A) until instructed. Once connected,
these will be posts for the rack.
Note that POLES (A+B) have slight horizontal line
indentations at 1” intervals. Each SLIP SLEEVE (D) has
raised horizontal lines inside designed to lock them in
place on POLES (A+B).
On BOTTOM POLE (A), place one pair of SLIP SLEEVES (D)
at desired height
no higher than 3rd indentation from
bottom. Please make sure arrow faces up and word “TOP”
is right side up.
Slide pair of SLIP SLEEVES (D) until you hear a click to
confirm the pair is locked onto BOTTOM POLE (A). Do this
for each BOTTOM POLE (A) and make sure height is
identical for each BOTTOM POLE (A). Do NOT place more
than one pair on each pole at a time.
Place SHELF (C) on its side and slide each BOTTOM
POLE (A) through each corner cylinder on SHELF (C).
Make sure SHELF (C) corner cylinders are positioned
over SLIP SLEEVES (D).
Stand the unit upright.
Note:
•
Level side of SHELF (C) is TOP side (TRINITY logo on
corner cylinders should be right-side up.)
•
Use a rubber mallet, if needed, to secure SHELF (C).