Trinity Highway CASS TL3, Руководство по сборке изделия

Страница: 4 / 42

TrinityHighway.com 3 Unreleased May 2021
Revision A November 2021
Customer Service Contacts
Trinity Highway is committed to the highest level of customer service. Feedback regarding CASS
®
,
its assembly procedures, supporting documentation, and performance is always welcome.
Additional information can be obtained from the contact information below:
Trinity Highway
Telephone
(888) 356-2363 (USA)
+1 214 589 8140 (International)
Contact Link
TrinityHighway.com\Contact
Website: www.trinityhighway.com
Trinity Highway Products, LLC
15601 Dallas Parkway
Suite 525
Addison, TX 75001
Important Introductory Notes
Proper assembly of CASS
®
is essential to achieve the performance that has been evaluated and deemed
eligible for federal-aid reimbursement by the FHWA per NCHRP Report 350. These instructions are to be
read in their entirety and understood before assembling CASS
®
. These instructions are to be used only in
conjunction with standard CASS
®
assemblies specified by the appropriate state/specifying agency. If you
need additional information, or have questions about CASS
®
, please contact the state/specifying
agency that has planned and specified this assembly and, if needed, contact Trinity Highway
Customer Service.
This product must be assembled in the location specified by the state/specifying
agency. If there are deviations, alterations, or departures from the assembly instructions specified in this
manual, the device may not perform as tested.
Note: The Metric conversion from Imperial in this manual uses a soft conversion.
The state/specifying agency’s careful evaluation of the site layout, vehicle population type and speed, traffic
direction, and visibility are some of the elements that require evaluation in the selection of a highway
product. For example, curbs could cause an untested effect on an impacting vehicle.
A set of product and project shop drawings will be supplied by Trinity Highway. The shop drawings will be
for each section of the assembly. These drawings are to be reviewed and studied thoroughly by a qualified
individual who is skilled in interpreting them.