5.3 Fault Acknowledgement
After shutdown due to a fault, the device remains locked against reactivation until the fault
is acknowledged. The fault can only be acknowledged after the cause of the fault has
been eliminated.
To acknowledge the fault messages, press the “ESC” key or turn the Trinabess inverter off
with the DC switch. Wait for a while and turn the device on again.
E84
System voltage is higher than
the warning value
Switch off the breaker of the control
box and contact Trinabess for service
E85
System voltage is lower than
the warning value
Switch off the breaker of the control
box and contact Trinabess for service
E86
Isolation test warning
Switch off the breaker of the control
box and contact Trinabess for service
Explanation
Action
Table 5.1 Fault lists
26
Error
code
User Manual
Solar Battery Hybrid System (T Series)
