manualshive.com logo in svg

TrimmerPlus LE720, Руководство оператора


Поделиться
Скачать
background image

• SAFETY & INTERNATIONAL SYMBOLS •

This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's
manual for complete safety, assembly, operating and maintenance and repair information.

SYMBOL

MEANING

SYMBOL

MEANING

• SAFETY ALERT SYMBOL

Indicates danger, warning or caution. May be used in
conjunction with other symbols or pictographs.

• READ OPERATOR'S MANUAL

WARNING: 

Read the operator’s manual(s) and

follow all warnings and safety instructions. Failure to
do so can result in serious injury to the operator
and/or bystanders.

• WEAR EYE AND HEARING PROTECTION

WARNING:

Thrown objects and loud noise can

cause severe eye injury and hearing loss. Wear eye
protection meeting current ANSI Z87.1 standards and
ear protection when operating this unit. Use a full face
shield when needed.

• THROWN OBJECTS AND ROTATING CUTTER CAN

CAUSE SEVERE INJURY

WARNING:

Small objects can be propelled at high

speed, causing injury. Keep away from the rotating rotor.

• KEEP BYSTANDERS AWAY

WARNING:

Keep all bystanders, especially children

and pets, at least 50 feet (15 m) from the operating area.

• ROTATING BLADE CAN CAUSE SEVERE INJURY

WARNING

: 

Stop the engine and allow the blade to

stop before replacing the blade, or before cleaning or
performing any maintenance. Keep hands and feet
away from the rotating blade.

4

Содержание LE720

















Отзывы:

Нет отзывов

Похожие инструкции для LE720

RedMax HE2601 Owner'S/Operator'S Manual preview
HE2601
Бренд: RedMax Страницы: 26

Бренды по названию

Популярные бренды

Загрузить еще бренды