3
Once the Taper Lock Bush has been driven off as
far as possible, remove the Grub Screw.
Insert a Flat Bladed Screwdriver into the Slot
opposite the Removal Hole as shown.
Use this to lever the Taperlock Bush open slightly.
Slide the Taper Lock Bush off the Rotor Stub.
Note:
USE CAUTION,
apply the absolute
MINIMUM
amount of leverage to slide the Bush off!
If too much leverage is applied, the bush may
fracture through its thinnest point!
Remove the Rotor Pulley from the Rotor Stub.
Place the Rotor Pulley Components to one side.
Remove the Key from the Rotor Stub.
Sling the Mower around the Headstock Link Pin.
Lift the Mower until standing on its end as shown
in the
RIGHT
image.
Note:
Ensure that the Hydraulic Hoses are tucked away
so they do not get damaged!
Remove Grub Screw
Flat Bladed
Screwdriver in place
Pulley removed
Taper Lock Bush driven
as far as possible
Sling around Pin
Lift to this
position
Remove Key
