ASSEMBLY INSTRUCTIONS
STEPS:
(1)Carefully remove all of the parts from the box and place on a flat surface. Check the Parts
List to make sure all of the parts are included. If there are any plastic covers to protect the end
of metal rod tips, remove the covers before assembly.
(2) Insert the rod of the Head (Part #B) into the holes on the Body(Part #C). Insert two posts of
each Leg (Part# D) into the matching holes in the body; Insert the rod of the Ear (Part #A) into
the hole on the top of the head and insert the rod of the Tail (Part #E) into the hole at the back
of the body; Attached the support bars inside of leg to opposite leg.(See FIG.1)
(3)Fasten each other with Plastic Ties(Part #H).Insert the wires of the Bow(Part#E) through the
holes of the body, then twist the wires together .(See FIG.2)
(4) Secure the sculpture to the ground with the Ground stakes (Part # G); (See FIG.2).
(5) Plug in.
FIG.1 FIG.2
42IN 100L GOLD WITH GLITTER DOE
ITEM NUMBER: TY-A-100L/2W-4(42)
A.
Ear
Qty
：
2pcs
B. Head
Qty
：
1pc
C. Body
Qty
：
1pc
D. Leg
Qty
：
4pcs
E. Bow
Qty
：
1pc
F. Tail
Qty
：
1pc
G. Ground Stake
Qty
：
4pcs
H. Plastic Ties
