Trilux LiveLink LightGrid, Инструкция по эксплуатации

Страница: 48 / 51

48
T5 Test function, used for internal and external tests (to test customer request functions before
inclusion in scope of functions)
T6 Test function, used for internal and external tests (to test customer request functions before
inclusion in scope of functions)
T7 Test function, used for internal and external tests (to test customer request functions before
inclusion in scope of functions)
T8 Test function, used for internal and external tests (to test customer request functions before
inclusion in scope of functions)
Indirect AUTO/OFF + brighten Indirect lighting is set to automatic mode/switched off + brighten
Direct right AUTO/OFF + brighten Direct light component on the right is set to automatic mode/switched off + brighten
Direct left AUTO/OFF + brighten Direct light component on the left is set to automatic mode/switched off + brighten
Direct right + indirect AUTO/OFF + brighten Direct component on right + indirect component is set to automatic mode/switched off +
brighten
Direct left + indirect AUTO/OFF + brighten Direct light component on the left + indirect component is set to automatic mode/switched off
+ brighten
CCT AUTO/ dim CCT Colour temperature auto + manual switching / long press dims colour temperature
Wireless push-buttons
no function no function
Room OFF Switch off room
Room OFF motion sensor ON Switch off room and enable motion sensor
Room ON AUTO MAX Switch on room and enable automatic mode; automatic HCL-curve + light control
Room ON MANUAL colour AUTO Switch on room and enable manual mode; enable HCL-curve in automatic mode
Room ON MANUAL 100% colour AUTO Switch on room and enable manual mode; enable HCL-curve in automatic mode and start at
100%
Room ON SCENE 1 Switch on room with scene 1
Room ON SCENE 2 Switch on room with scene 2
Room ON SCENE 3 Switch on room with scene 3
Room ON SCENE 4 Switch on room with scene 4
Room colour AUTO Enable HCL sequence in automatic mode in the room
Room colour MANUAL Enable HCL sequence in manual mode in the room
Room OFF + disable motion sensor Switch off room and disable motion sensor
Room ON SCENE 1 + disable motion sensor Switch on room with scene 1 + motion sensor is disabled
Room ON SCENE 2 + disable motion sensor Switch on room with scene 2 + motion sensor is disabled
Room ON SCENE 3 + disable motion sensor Switch on room with scene 3 + motion sensor is disabled
Room ON SCENE 4 + disable motion sensor Switch on room with scene 4 + motion sensor is disabled
Room My SC1 Individual scene 1 is called up in the room
Room My SC2 Individual scene 2 is called up in the room
Room My SC4 + disable motion sensor Individual scene 4 is called up in the room + motion sensor is disabled
Group OFF Group is switched off
Group OFF motion sensor ON ready Group is switched off and motion sensor is enabled
Group ON AUTO MAX Group is switched on and automatic HCL-curve + light control
Group ON MANUAL colour AUTO Switch on group and enable manual mode; enable HCL-curve in automatic mode
Group ON MANUAL 100% colour AUTO Switch on group and enable manual mode; enable HCL-curve in automatic mode and start at
100%
Group ON SCENE 1 Switch on group with scene 1
Group ON SCENE 2 Switch on group with scene 2
Group ON SCENE 3 Switch on group with scene 3
4.1.2 RADIO BUTTON
APPENDIX