Trilliant SecureMesh CONN-2000, Руководство по установке

Страница: 37 / 56

Notice: The contents of this document are proprietary and confidential and the property of Trilliant Holdings, Inc., its susidiaries, affiliates, and/or
licensors. This document is provided subject to the confidentiality obligations set forth in the agreement between your company and Trilliant. The contents
may not be used or disclosed without the express written consent of Trilliant.
37
Installation Guide for SecureMesh® CONN-2000 - PL-0689A
Reset Functions
You can find the reset button on the Trilliant logo, on the front of the device, as shown
in
Figure 17 .
Figure 17: The Reset Button
The reset button has different capabilities, such as:
l
Turn on/off the antenna alignment mode
l
Reboot the device
l
Reset the CONN-2000 to factory defaults
If it fails to communicate with other devices, press the reset button.
To keep all current values for all parameters and reboot, press the reset button for 5 -
15 seconds.
To complete the actions in the following table, press and release the reset button for
the particular amount of time denoted.
Table 5: Reset Switch Actions
Action
Amount of Time to
Press and Release the
Reset Switch
Notes
Add to antenna
alignment
Press for < 2 seconds The power LED turns amber to
indicate the adjustment mode.