Model Two & Model Two Lite - Operation Manual
34
EIA Number
- Press
FCN
to switch to alphanumeric entry mode, then enter the desired EIA
number for the channel. When you are satisfied with your entry, press
F1
(ENTER) to store the
change.
Standard Number
- Press
FCN
to switch to alphanumeric entry mode, then enter the desired
standard number for the channel. Press
F1
(ENTER) to store the change.
Channel Label
- Press
FCN
to switch to alphanumeric entry mode, then enter the desired
label (up to 5 characters) for this channel. Press
F1
(ENTER) to store the channel label.
Active Status
- Press
F1
to switch between ENA (enabled) and DIS (disabled). Enabling a
channel adds it to the selected User Channel Plan. Disabling a channel removes it from the
User Plan.
Type
- Use
F1
to toggle
between the channel types (TV, SIGL, DIGI, or DUAL).
TV
- Audio and Video carriers (parameters: Frequency, Audio Offset)
SIGL
- Single Frequency Channels (parameters: Frequency, Measure BW)
DIGI -
Digital Channels (parameters: Frequency, Measure BW)
DUAL
- Dual Audio Channels—(parameters: Frequency, Audio 1 Offset, Audio 2 Offset)
Frequency
- Press
FCN
to switch to Numeric Entry mode and enter the desired frequency
(Video Frequency for TV and DUAL type channels or Center Frequency for DIGI and SIGL type
channels). Once the desired modification is made, press
F1
to store the change.
Note:
The rest of the parameters in the edit list are affected by which
type of channel is selected.
Note:
The new frequency you enter should always be less than
870 MHz.
Aud Offset -
Press
FCN
to switch to Numeric Entry mode and enter the positive offset of the
audio frequency from the video carrier. Press
F1
(ENTER) to store the change. (This
parameter appears for TV type only).
Note:
The sum of this offset and the video carrier frequency should never
be more that 870 MHz.
