Trilithic EASyCAST, Руководство по установке оборудования, Страница: 38 / 44

EASyCAST - Installation Manual
36
Manual and Automatic modes provide control over the re-sending of EAS events when the
station is manned or unmanned. The EASyCAST can be changed from manned (manual) to
unmanned (automatic) mode through the front panel menu system or the configuration software.
Automatic mode: Each EAS event can be configured to be disabled (off - do not send event) or
to send immediately after receipt (send event immediately).
Manual Mode: Each EAS event can be configured to wait indefinitely for permission to send
(never auto-send), to send immediately after receipt (send immediately), or to wait a specified
number of minutes before sending (send in xx minutes). When an EAS event is waiting, an
operator can manually override the delay by either sending the message, or cancelling it. The
configurable time delays are 5, 10, 15, 20, 30, 45, or 60 minutes.
Event
Code Event Description Enabled
Auto Mode Delay Manual Mode Delay
NIC National Information Center
NMN Network Message Notification
NPT National Periodic Test
NUW Nuclear Power Plant Warning
RHW Radiological Hazard Warning
SMW Special Marine Warning
SPS Special Weather Statement
SPW Shelter in Place Warning
SVA Severe Thunderstorm Watch
SVR Severe Thunderstorm Warning
SVS Severe Weather Statement
TOE 911 Telephone Outage Emergency
TOA Tornado Watch
TOR Tornado Warning
TRA Tropical Storm Watch
TRW Tropical Storm Warning
TSA Tsunami Watch
TSW Tsunami Warning
VOW Volcano Warning
WSA Winter Storm Watch
WSW Winter Storm Warning